Products Reviews

This is a great set of panels. If you're thinking about trying to make them yourself and save some money don't even try. I started down that path and these are far better than anything you can make yourself especially for the money. I would definitely recommend them.

I started building my 737 sim six years ago. When I started I was going to make all of the panels myself. I bought acrylic, a cnc machine, 3d printer and software to support both. So far I've built my MIP, MCP and nav/com panels on the pedestal. I don't have the time now that I used to so I thought I would try panels from PC Flights. First I ordered the transponder panel and the brightness control panels to see how they looked. Also, I wanted to see how the dzus mounting holes aligned with my pedestal that I had already built. All I can say is the PC Panels are FANTASTIC, quality is great, the paint is thick and the dzus holes align with the holes I cnc cut in my mounting rails 5 years ago. I've since bought the cargo fire panel, adf and radar panels and the quality is great! My next purchase will be the full forward overhead. If you think you can build panels yourself for cheaper trust me you can't. I'm adding this review to the other products i've purchased.

I started building my 737 sim six years ago. When I started I was going to make all of the panels myself. I bought acrylic, a cnc machine, 3d printer and software to support both. So far I've built my MIP, MCP and nav/com panels on the pedestal. I don't have the time now that I used to so I thought I would try panels from PC Flights. First I ordered the transponder panel and the brightness control panels to see how they looked. Also, I wanted to see how the dzus mounting holes aligned with my pedestal that I had already built. All I can say is the PC Panels are FANTASTIC, quality is great, the paint is thick and the dzus holes align with the holes I cnc cut in my mounting rails 5 years ago. I've since bought the cargo fire panel, adf and radar panels and the quality is great! My next purchase will be the full forward overhead. If you think you can build panels yourself for cheaper trust me you can't. I'm adding this review to the other products i've purchased.

I started building my 737 sim six years ago. When I started I was going to make all of the panels myself. I bought acrylic, a cnc machine, 3d printer and software to support both. So far I've built my MIP, MCP and nav/com panels on the pedestal. I don't have the time now that I used to so I thought I would try panels from PC Flights. First I ordered the transponder panel and the brightness control panels to see how they looked. Also, I wanted to see how the dzus mounting holes aligned with my pedestal that I had already built. All I can say is the PC Panels are FANTASTIC, quality is great, the paint is thick and the dzus holes align with the holes I cnc cut in my mounting rails 5 years ago. I've since bought the cargo fire panel, adf and radar panels and the quality is great! My next purchase will be the full forward overhead. If you think you can build panels yourself for cheaper trust me you can't. I'm adding this review to the other products i've purchased.

I started building my 737 sim six years ago. When I started I was going to make all of the panels myself. I bought acrylic, a cnc machine, 3d printer and software to support both. So far I've built my MIP, MCP and nav/com panels on the pedestal. I don't have the time now that I used to so I thought I would try panels from PC Flights. First I ordered the transponder panel and the brightness control panels to see how they looked. Also, I wanted to see how the dzus mounting holes aligned with my pedestal that I had already built. All I can say is the PC Panels are FANTASTIC, quality is great, the paint is thick and the dzus holes align with the holes I cnc cut in my mounting rails 5 years ago. I've since bought the cargo fire panel, adf and radar panels and the quality is great! My next purchase will be the full forward overhead. If you think you can build panels yourself for cheaper trust me you can't. I'm adding this review to the other products i've purchased.

I started building my 737 sim six years ago. When I started I was going to make all of the panels myself. I bought acrylic, a cnc machine, 3d printer and software to support both. So far I've built my MIP, MCP and nav/com panels on the pedestal. I don't have the time now that I used to so I thought I would try panels from PC Flights. First I ordered the transponder panel and the brightness control panels to see how they looked. Also, I wanted to see how the dzus mounting holes aligned with my pedestal that I had already built. All I can say is the PC Panels are FANTASTIC, quality is great, the paint is thick and the dzus holes align with the holes I cnc cut in my mounting rails 5 years ago. I've since bought the cargo fire panel, adf and radar panels and the quality is great! My next purchase will be the full forward overhead. If you think you can build panels yourself for cheaper trust me you can't. I'm adding this review to the other products i've purchased.

The panel was very very high quality and the letters where very sharp and when backligt it look very good and blended in with my A10C cockpit I have now brought 2 more panels and I will be buying more for them I highly recommend them they are a A1+ seller and the price is reasonable as well

Clacky! Feels good. Stop ring is easy to configure. Not pictured is a small shaft that sticks out toward the front to fit into a hole in your panel and prevent the unit from rotating. Distance from flat of shaft to opposite side is ~5.55 mm for those printing their own knobs. Depth behind panel is more like 18 mm than the 14 mm listed, but I can't say I really care (big switch takes ~28 mm minimum).

Wrong item pictured in listing; actual product has a round shaft and not the D shaft shown. Dimensions described in listing are accurate.

Not 2.54 mm pitch, just like the pictured dimensions say. Won't fit standard perfboard/protoboard without a little violence. Button housing is missing the + polarity mark mentioned in the description. Instead, the - side is marked with some green paint/dye on the side of the LED leg and another marking visible from the top button opening. LED color is a nice, pure green. Tactile click is clean and hard to miss.

you can have it with a 76 x 14.5 mm display window I have a very nice and bright display OP202i

Completely happy with these panels. Workmanship is tops notch. Will continue to do business.

First time buyer, opening the package and seeing these panels for first time was mind blowing on how the craftsmanship is AAA+

Excellent! I continue to be impressed with workmanship.

First time buyer, EXCELENT craftsmanship, very happy.

Very good quality, I'm pleased with my purchase. I've mounted 6x6x6 push buttons to piece of project board for proto typing and all fits and works very nicely. Great job.

The quality of this panel is awesome. The engraving is also deep enough to clearly mark letters. Paint is also well done. This is 2 piece with backing. It has some weight to it unlike the some of the cheaper one I had before.

Very good material, looks very realistic. Make sure you buy all the stuff like switches and buttons. Don't be like me and not buy a program board with it. The shipping did take about 13 or 14 business days but, that's the usps for you.

is there any way of knowing when these might be back in stock? Or are we able to pre-order?

I agree with Pete Doyle. Good craftsmanship, as are all of the other panels I've gotten from here, but this design needs to be updated to hold 16mm latching pushbutton switches. This panel is made to hold 20mm switches, but good luck finding them anywhere.

This was my first purchase. Did not disappoint! Excellent craftsmanship. Clean install and easy to setup. Very, very happy.

Good craftmanship. Design needs to be updated to hold the recommended 16mm Latching pushbutton switches. I used an old gift card, glued to the back plate.

Just received my copy of this panel for my Hornet sim pit build. Quick turn-around & shipping. Quality looks awesome. Can't wait to mount it and add the Jettison select & Brake lever for greater VR immersion in DCS. Giving a 4/5 as I haven't yet integrated it into my build...leaving a little 'head room' to follow up once in-place. Thanks, "Harv"

Just received my copy of this panel for my Hornet sim pit build. Quick turn-around & shipping. Quality looks awesome. Can't wait to mount it and add the landing gear lollipop for greater VR immersion in DCS. Giving a 4/5 as I haven't yet integrated it into my build...leaving a little 'head room' to follow up once in-place. Thanks, "Harv"

I'm surprised no one has wrote a review on this yet. Aside from rather it works or not the most important thing about a toggle switch is if it is satisfying to click. The answer is yes it feels very nice to click on and off. Obviously it works as well.